QRUQSP – Receiving Weather Sensors via RTL-SDR and Sharing over APRS
Setting up Packet Radio on a Raspberry Pi (4 thru Zero-W) running Raspberry Pi OS Bullseye, Buster, Stretch or Jessie
Build an Amateur Radio APRS RX Only IGate Using a Raspberry Pi and an RTL-SDR Dongle in Less Than Half an Hour : 5 Steps - Instructables
How to Build an APRS iGate with RTL-SDR, SDR#, Direwolf and PinPoint APRS for Windows – KM6ZPO
APRS iGATE Receive Only Node – Mike Richards G4WNC
APRS RX IGate with RTL-SDR and Raspberry Pi | Jeffrey Kopcak, MBA – K8JTK | Page 9
TT7 High Altitude Balloon: The APRS iGate
RTL-SDR pour recevoir facilement des paquets APRS - Radioamateurs France
Raspberry Pi ve RTL-SDR Kullanarak Kolayca APRS iGate Yapımı | Pico Balloon
An updated guide to setting up an APRS receive (RX) only iGate using a pre-built image on a Raspberry Pi and an RTL-SDR dongle. Now works with Raspbian Stretch and Direwolf 1.4
GitHub - mmiller7/aprs-igate-rtl-sdr-setup: Scripts to set up, install, and configure an APRS iGate using RTL-SDR receiver on Debian-based systems (including Ubuntu and Raspberry PI)
Marrold's Blog: A Raspberry Pi and RTL-SDR based APRS iGate
Guide mis à jour pour APRS RX iGate avec Raspberry Pi et un RTL-SDR - Radioamateurs France
APRS IGate Built Using A Raspberry Pi | Hackaday
A guide to setting up an APRS receive only iGate using a Raspberry Pi and an RTL-SDR dongle | QSO365
Setting up a Raspberry Pi based APRS RX IGate with an RTL-SDR
APRS IGate - Digipeater
APRS RX IGate with RTL-SDR and Raspberry Pi : r/APRS
Setting up a Raspberry Pi for Ham Radio with RTL-SDR
Building APRS Digipeater IGate with RTL-SDR and Baofeng Radio - YouTube
A Pre-Built Raspberry Pi Image for using an RTL-SDR as an APRS RX iGate
D-PRS Rx-iGate by Raspberry Pi 2, still a $35 solution | VR2XKP's Blog
Marrold's Blog: A Raspberry Pi and RTL-SDR based APRS iGate
Mare & Gal Electronics » Blog Archive » Raspberry Pi + RTL SDR dongle = APRS Rx only gate (Part Two – Decoder)
DK3ML on Twitter: "@G0WFV No, I used rtl-sdr with pymultimonaprs, but now switched to wouxung handheld + direwolf." / Twitter
Wie du ein APRS iGate auf einem Raspberry Pi installierst › HAMSPIRIT.DE
Building APRS Digipeater with Raspberry Pi - 4X5MG
